Wondertex

General Information

Premier 5 is a hot or cold mix decorative textured finish for use

on ceilings and walls.

Authority

Premier 5 conforms to:

Manufactured to BS6214: 1982

Coverage

As a general guide: Light textures 35m2 / 25kg

Heavy textures 20-30m2 / 25kg

Surface Preparation

All surfaces must be clean, sound and dry prior to application.

For application on papered, flaky or distempered surfaces,

Remove previous decorative material and seal, using Wondertex stabaliser

Mixing

Slowly add Premier 5 to hot, warm or cold water at about

1kg per pint (approx.500ml). Stir in briskly and leave for a few

minutes. Mix to the required consistency by adding more. Always

leave Premier 5 to stand for a few minutes before application. Do

not use below 3oC.

Application and fixing

Apply liberally in one metre strips with brush or roller across the

ceiling width or from top to bottom of walls. Texture an area of

approximately one square metre at a time while still wet. Working

time is up to 15 minutes.

HOT OR COLD MIX STAYS WORKABLE FOR LONGER

Easy to work with, mixes easily and slides on, saving time

Same day process saves time and travel

Covers and hides uneven surfaces

A greater coverage per bag

Gives a professional finish time after time

Caulking and texturing

Caulk out taping and pre-caulking with caulk tool. After

approximately 2 hours, apply texture coat with a laying on

brush or lambswool roller and pattern to required

design. Leave to dry completely for 5 days, apply a mist

coat and full coat of good quality emulsion paint for the

perfect  finish.

Should weather or site conditions cause uneven drying,

any resulting colour irregularities can be treated simply by

painting over with an almond white emulsion diluted with

25% water.

Where texturing may be delayed for an unusually long

period, sealing should be carried out as soon as possible

– particularly if the weather is hot and dry. To produce a

surface of uniform porosity the recommended method is

to carry out taping, pre-caulking, caulking and texturing

as a one-day operation.

Packaging

Supplied in powder form in 25kg bags.

Storage

Recommended shelf life 12 months. Store in dry

conditions.

Health & Safety

Avoid contact with eyes and ingestion. If splashes enter eyes DO

NOT RUB but wash with plenty of water. It is advisable to wear

protective gloves and wash off any contact with skin. Wash hands

after use. Clean any accidental splashes from floors etc. with

warm water before dry.