Greengates Builders Merchants

1Ltr Satin Quick Drying Clear Varnish

1Ltr Satin Quick Drying Clear Varnish

Ronseal Quick Drying Varnish: is based on a unique water based polymer to maximise performance and friendlier use. Ronseal Quick Drying Varnish gives a clear finish that enhances the natural beauty of wood whilst providing long lasting protection to all interior woodwork. Ronseal Quick Drying Clear Varnish provides a non-yellowing finish for woodwork.

Intro­duc­tion: Ronseal Quick Drying Varnish provides a transparent finish which displays and highlights the rich, natural beauty of the wood. It is suitable for application to soft and hardwoods as well as cork, hardboard and chipboard in interior situations. Ronseal Quick Drying Clear Varnish does not yellow woodwork. Ronseal Quick Drying Varnish is based on a unique, water based polymer which does not yellow wood. The product has a low solvent content and low odour. Ronseal Quick Drying Varnish forms a tough, durable seal bonding together the fibres of wood. It is resistant to knocks and scratches, and will withstand most household chemicals. Ronseal Quick Drying Satin Varnish gives a sheen finish. Ronseal

Composition: Ronseal Quick Drying Varnish is based on a unique, water based polymer and contains no hydrocarbon solvents. Satin variants contain inert matting agents.

Fields Of Application: Ronseal Quick Drying Varnish may be used for interior applications to all softwood, hardwood, plywood, blockboard, particle boards and cork, windows, skirtings, architraves and panelling. Ronseal Quick Drying Varnish is not recommended for exterior use. Ronseal Quick Drying Varnish may also be used to refurbish and enhance the finish of existing sound coatings on the above mentioned substrates. Ronseal Quick Drying Varnish is not suitable for use on floors.

Preparation: Ensure all surfaces are free from wax, grease and oil by wiping with a cloth dampened with white spirit.

Barewood: Sand smooth with fine sandpaper. Do not use steel wool. Remove dust with a damp cloth.

Varnished wood: Remove unsound varnish. Sand well to a uniform appearance and clean with white spirit. Allow to dry thoroughly.

Application: Ronseal Quick Drying Varnish has been formulated for brush application. Always use a good quality, synthetic filament brush and stir the varnish thoroughly before and during use. Ronseal Quick Drying Varnish should be flowed on with the minimum of brushing, and finished in the direction of the grain. Do not overbrush. Any milkiness will disappear, so do not overbrush as this will adversely affect the finished result. When applying coloured varnish an initial sealing coat of clear varnish can be given to improve the finish. Ronseal Quick Drying Varnish has a rapid drying time. Organise work to minimise wet edges.

Coverage: Up to 20 m² per litre per coat. Coverage will vary with absorbency of substrate. Apply in accordance with coverage guidelines or performance will be reduced.

Drying Time: Ronseal Quick Drying Varnish is touch dry in 20 minutes. Recoat after 2 hours. Poor ventilation, low tempe­ratures, high humidity and porosity of the substrate will lengthen drying and re-coat times.

Cleaning Of Tools: All equipment should be cleaned immediately after use with water and detergent. Remove as much product as possible from equipment prior to cleaning.

Important Notes: This product contains no added lead. However, wooden and metal surfaces particularly in pre-1960 buildings may have previously been treated with paint containing lead pigments. Special care must be taken when sanding or stripping. Professional decorators should carry out a COSHH assessment before any work is carried out. Avoid the inhalation of dust when sanding, wear a suitable face mask or employ wet sanding techniques. Always conduct a test area to confirm colour suitability. Certain tropical hardwoods have surface charac­te­ristics which may prevent full absorbency. Before applying Ronseal Quick Drying Varnish always carry out a test to an incon­spi­cuous area first. Apply in accordance with coverage guidelines to ensure adequate film thickness otherwise performance will be adversely affected. Do not use Ronseal Quick Drying Varnish on plastic type materials. Do not use Ronseal Quick Drying Varnish when temperature is below 10°C or in high humidity. Solvent based polyurethane varnishes should be allowed to age for at least one month before the application of Ronseal Quick Drying Varnish. Do not use wire wool when preparing surfaces for Ronseal Quick Drying Varnish. Always stir varnishes thoroughly before and during use. If water is accidentally splashed onto the surface within 2-3 days of application, simply remove by gently wiping with a soft cloth. Do not rub the wet surface.

Storage: Store in a cool, dry, well ventilated place away from heat and sources of ignition. No smoking. Store upright and carefully reseal partly used containers. The shelf life of the product in airtight containers is at least 2 years. Always store in ambient conditions away from temperature extremes. Protect from frost. Store above 5°C.

Health & Safety: Observe and follow all warnings and instructions for use shown on the pack. Ensure maximum ventilation during application and drying. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water. Keep out of reach of children.

Flamma­bility: Flash point above 61°C. Non-flammable product.

Disposal: Some local authorities have special facilities for the disposal of waste paints/­varnishes. Do not empty product into drains or water­co­urses.

Liability: Whilst these specifi­cations are based on expert technical knowledge and practical experience, we cannot assume respon­sibility for any work as the ultimate result depends on factors beyond our direct control. Standard codes of painting practice should be followed.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Area Covered

Deliveries can be made throughout most of Lancashire, appro­ximately 20 miles radius from our depot at Accrington, Lancashire.

Other locations may also be arranged for direct loads from our suppliers e.g. full loads of bricks or blocks.

Vehicle Types

We operate 3 crane offload vehicles:

  • Our smallest vehicle can carry approx 5 ton.
  • Our middle sized vehicle can carry approx 7.0 ton and has a tipping facility for loose sand and aggregates.
  • Our largest vehicle can carry approx 8.0 ton and also has a tipper facility.

Pricing

Pricing will vary depending on the goods required and distance travelled.

We can offer very competitive rates for delivery — please contact us for more details.