Greengates Builders Merchants

350ml Solvent Free Pink Grip

Solvent Free Pink Grip: is a direct bond solvent free gap filling adhesive specifically formulated for the professional user.  The product can be used to replace mechanical fixings in a wide variety of building and home improvement applications for bonding wood, brick, plaster, plaster­board, polystyrene, Styrofoam and most plastics, metals and numerous other surfaces.

Solvent Free Pink Grip gives the following key benefits:

  • Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most appli­cations.
  • Excellent early and ultimate adhesive strength on porous substrates.
  • Excellent gap filling properties to accommodate uneven surfaces.
  • Good “nip off” qualities to prevent messy stringing of the adhesive.
  • Solvent Free Pink Grip bonds to virtually all common building surfaces to porous substrates and is designed primarily for  internal use.

Application:

  • The surfaces to be bonded must be clean, dry and totally dust free. 
  • At least one surface must be porous. Very porous or dusty surfaces should be primed with a PVA sealer and allowed to dry before applying this product. Non porous surfaces must be roughened with sandpaper to improve adhesion.
  • Cut the tip of the cartridge, pierce the inner membrane and apply using standard sealant gun.
  • Apply a 6mm diameter bead along the length of the item to be fixed. On large panels, repeat at 600mm centres. Press firmly into place and bed down by applying even pressure all over. Very heavy items need to be supported whilst adhesive cures (24-48hrs). When gap filling is necessary, for example battens against an uneven wall, mark the areas where there is a larger gap and apply a thicker bead in these areas.
  • Full bond strength is achieved in 24-48 hours.

Caution when applying externally:  Do not apply when rain is imminent.­  Protect glue line from water contact with impervious paint system or suitable sealant.­  In damp or very cold conditions, cure time may be signi­fic­antly extended.­  If in doubt, for external appli­cations, use Pink Grip.  Do not use where both surfaces are non-porous (e.g. plastic/­plastic or metal/­metal).­  Use a Pink Grip.

It is the user’s respon­sibility to determine suitability for use.­  

Coverage: Appro­ximately 12 linear meters for a 6mm diameter bead.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Area Covered

Deliveries can be made throughout most of Lancashire, appro­ximately 20 miles radius from our depot at Accrington, Lancashire.

Other locations may also be arranged for direct loads from our suppliers e.g. full loads of bricks or blocks.

Vehicle Types

We operate 3 crane offload vehicles:

  • Our smallest vehicle can carry approx 5 ton.
  • Our middle sized vehicle can carry approx 7.0 ton and has a tipping facility for loose sand and aggregates.
  • Our largest vehicle can carry approx 8.0 ton and also has a tipper facility.

Pricing

Pricing will vary depending on the goods required and distance travelled.

We can offer very competitive rates for delivery — please contact us for more details.