AdSeal Stone & Slate Protector
AdSeal Stone & Slate Protector has been uniquely designed to give outstanding results on natural materials such as Stone, Slate, Travetine, Terracotta, and even Clay (in clay paviors)
Geological materials have different physical and chemical structures from man-made products which is why they need special treatment.
A natural, sympathetic look
For a MATT, colour enhancing finish, apply one coat or, if a delicate sheen is required, apply two coats.
Developed by our own specialist design team, along with consultant organic chemists, this fantastic product offers ease of installation with considerably improved performance and longevity.
PLUS gives a really hardwearing and long lasting finish on:
- Block Paving sealer
- Patio and paving flags
- Imprinted Concrete sealer
- Tegular setts, etc.
Designed for use as:
Natural Stone sealer
Slate sealer and slate tile sealer
Marble, limestone sealer
Terracotta and travertine sealer
For most natural paving products
Indoors and light to medium trafficked areas; with correct maintenance and depending upon surface type, potentially 10 years plus. Externally colour will remain for 1 – 2 years although protective effect will remain for longer, potentially 4 – 6 years, depending upon surface type.
A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original forming a monolithic layer. Down time is minimised with rapid cure additives. Fading of the colour and reduction in protective effect take place more rapidly in heavily trafficked areas and these areas can be easily ‘touched up' without the need to strip the original coat. Lower trafficked areas will only need retreating very occasionally, if ever.
Sweep regularly to remove abrasive dirt and grit from the surface and rinse down weekly with a hose (not jet washer) externally or internally mop weekly using a mild detergent if required. Spills and marks should be wiped up as soon as possible and not allowed to dry on. Heavy stains can be removed using AdSeal Orange Degreaser.
Should signs of wear appear a maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight' coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.
Support and Tech Info
We are more than happy to share our extensive practical and technical knowledge and expertise with you. Whether you are sealing for the first time, an experienced installer or a professional Specifier with a technical query, please call us on 01204 523973 or email: support@AdSeal.info
- we are here to help.