Allcon 10 can be used for the bonding of timber, chip and fibre boards, MDF, coated boards, metals, aluminium, natural or artificial stones, concrete, marble, ceramics, plastics, plaster­boards, foam, hard foam, acrylic, insulation and much more. In fact Allcon 10 is a Construction Adhesive which can bond nearly all materials together.

Benefits:

• Use with standard caulking gun
• Can be put under stress after just 7 -10 minutes
• No primer required
• Replaces multiple other adhesives and glues
• Safe to use
• Always the right product to hand
• Opened cartridge can be used for up to 10 months
• Unopened cartridge last for up to 18 months
• Minimum wastage
• Can be painted and varnished
• Suitable for indoor and outdoor use.

Features:

• Single Component
• Easy handling
• Solvent free
• Resistant to weather and ageing
• Resistant to many chemicals
• Frost-proof
• Usable with natural stone
• Bonds nearly all materials

How To Use:

• The surfaces to be bonded must be free from grease, clean and stable.  One surface must be permeable.
• The adhesive reacts with the moisture in the air or in the material by slightly foaming up.
• Curing can be accelerated by using a water spray.
• Sand all smooth materials, clean with beko Allclean and lightly moisten with water.
• Join pieces within 3 minutes.
• Press until product sets.
• It is recommended an adhesion test is done prior to any application.