Cracked Concrete Paths Causing You Problems Then Look No Further Greengates Builders Merchants Accrington, Lancashire Would Be Happy To Help!
This article will be looking at how to repair cracked concrete paths and the various materials that you will require.
Over the winter months due to ice, frost and temperature variations contraction and expansion are likely to occur which results in cracks and gaps in concrete paths. During the months where we experience better weather this is the perfect time to repair these damaged concrete paths.
The typical repair method for cracked concrete paths is as follows:
- Chisel out the crack to create a backward-angled cut, using a grinder or cold chisel and a hammer. It is important to clean all dust, dirt and loose materials from the area using a wire brush, or an electric drill with a wire wheel attachment.
- Apply a thin layer of bonding adhesive to the entire repair area using a paint brush. The bonding adhesive helps keep the repair material from loosening or popping out of the crack.
- For repairing a narrow crack, typically prepare a 1:3 (cement: sharp sand by volume) mix, then trowel it into the crack.
- For a wider gap, prepare a 1:2:4 (cement: sharp sand: chippings by volume mix) and apply.
- A useful guide is to use a maximum aggregate size of one third the crack width.
- Smooth the surface of the repair and attempt to match the surrounding surface texture.
The cement used for this repair is a rapid setting cement which is beneficial when there is a need to restore site services quickly. Quickcem castle cement is what is recommended to carryout this job. Castle Quickcem is a Portland cement containing calcium sulfo-aluminate, specially developed to give quick setting and hardening characteristics.
What you will need for the job:
1. A chisel
3. Wire brush
4. Bonding adhesive
7. Sharp sand