Greengates Builders Merchants

Everbuilds Tile On Timber Available From Greengates Builders Merchants Accrington, Lancashire

 EVERBUILD TILE ON TIMBER is a grey ready mixed paste tile adhesive with high flexibility and water resistance specifically designed for tiling directly onto timber floors.

TILE ON TIMBER is suitable for fixing all types of ceramic tiles, including vitrified, porcelain and mosaics and is ideal for application directly onto timber panels, plywood, composite board, tongue and groove floorboards and floating plywood floors. TILE ON TIMBER is also suitable for tiling on cement based substrates and its grey colour enables TILE ON TIMBER to be used as a floor grout.

Benefits

  • Excellent water resistance.
  • Ready Mixed, no mixing required
  • Flexible, copes with the natural movement of subfloors
  • Can be used as a grout

Areas for Use

  • Kitchen/­Bathroom walls.
  • Shower areas.
  • Communal and power showers
  • Work tops subject to water contact.

Surface Preparation

Substrates must be porous. Do not apply below 5`C.(surface or ambient tempe­ratures). Apply using flooring grade board notched trowel (10mm x 10mm notch at 16mm centres) to give an even ribbed bed of adhesive on substrate. Bed the tiles directly into the surface of the adhesive and secure with a slight twist action to remove voids. It is good practice to periodically remove a tile and check that at least 75% of the tile is covered in adhesive and that the adhesive bed is no more than 3mm thick, otherwise adhesive will not achieve its full cured strength. Do not walk on floors after tiling for 24 hours minimum or until adhesive has set. For cool, low porosity surfaces, this may be up to 72 hours.

So come and see us today or give us a ring and get more information on

 Tile On Timber

Greengates Builders Merchants delivering to the whole of Lancashire including: Accrington, Blackburn, Burnley, Clitheroe, Darwen, Great Harwood, Haslingden, Padiham and Pendle.

Posted in Product news on