Greengates Builders Merchants

Greengates Builders Merchants Accrington, Lancashire Reminds You To Check Your Render!

Renders may crack, degrade or debond over time due to normal weathering, impact or freeze/thaw attack. Due to the freezing temperatures we experienced in winter it is a good idea to now check that your render is still ok. Hollow or debonded render can be found by tapping the render: if it makes a ‘hollow’ sound then it may be coming away from the wall.

To repair a debonded render:

  • Remove the hollow debonded render from the wall- correct preparation of the background surface is essential.
  • The surface must provide a good key. It should be clean and sound; an external bonding agent is recommended.
  • The patch repair should be of a similar mix proportions to the original render and would typically be a 1:4 or 1:5 (cement: sharp sand volume) mix.

The cement used for this type of job would be Ordinary Portland Castle Cement. The strength requirements of renders are widely varied and Ordinary Portland Castle Cement is designed to be adaptable in performance to accommodate the requirements of the application.

Cement is suitable for use in all types of renders. Care should be taken to ensure that the surface to be rendered is clean and free from dust. Mixes for successive coats should neither be stronger nor thicker than the previous coat. Each coat should be allowed to cure for several days before a subsequent coat is applied.

Ordinary Portland Castle Cement is a cement which enhances susta­ina­bility through the use of carefully selected recycled raw materials, reducing the carbon footprint of the cement.

What you will need for this job:

1.      External bonding agent

2.      Cement: sharp sand mix: Ordinary Portland Castle Cement


Contact Greengates Builders Merchants Accrington, Lancashire NOW to get what you need!


Greengates Builders Merchants delivering to the whole of Lancashire including: Accrington, Blackburn, Burnley, Clitheroe, Darwen, Great Harwood, Haslingden, Padiham and Pendle.

Posted in Product news on